HSC Hollow Coil does not use the magnetic core, skeleton and shielding cover, but is wound on the mold first, then the mold is removed, and a certain distance is opened between the coils. Our products comply the EU standards, have good quality and have a broad market in China and overseas.
HMD0505 Molded Coil introduction: General I.F. Adjustable Inductors changes the inductance of the coil by changing the relative position of the permanent magnet and the coil, so as to achieve the purpose of linear compensation. There are usually two ways to change the inductance.
HTCT8095 Filtered Inductance is a commonly used inductance device. There are oscillating coils for semiconductor radios, line oscillating coils for televisions, line linear coils, intermediate frequency trap coils, frequency compensation coils for audio, and choke coils.
Adjustable Inductance is made by winding enamelled wire on high-frequency magnetic core or ferrite magnetic rod. An adjustable permanent magnet is installed next to the coil to adjust the inductance. Our products comply EU standards, have good quality and stability, and have a broad market in China and overseas.
Air Core Coil Inductor does not use the magnetic core, skeleton and shielding cover, but is wound on the mold first, then the mold is removed, and a certain distance is opened between the coils. Our products comply the EU standards, have good quality and have a broad market in China and overseas.
HPKH0910 Inductance has low cost and flexible design. The outer layer can be immersed in varnish or protected by UL bushing. It has excellent insulation and considerable stability to the change of current and inductance.
