1. Product Introduction of Common Mode Inductor With Base Magnetic Ring
The Common mode inductor with base magnetic ring is used to make the Common Mode Inductor with Base magnetic Ring for use in the military. The magnetic materials used are usually ferrite and ferroaluminum, which are known to be stable, vary little with temperature and have high air gap strength. It is very suitable for military power supply. We hope to be your long-term partner in China.
2. Product Parameter (Specification) of Common Mode Inductor With Base Magnetic Ring
Customer
Customer Number
Sample preparation date
Five ring number
Production version
A 18.5± 1
B 5± 1
C 10± 1
D 8.0± 1
E 4.5± 1
F
G
I
2. ELECTRICAL CHARACTERISTICS (Electrical characteristics)
Item
Specifications
Reference record value
Test instrument
L1:L2 Indutance
25mH::25mH ±20%
26 mH:26mH
CHEN HWA 100 LCR METER
L Test Frequency
10KHz 0.3V
CHEN HWA 100 LCR METER
Turns
83T:83T REF
Outer number
2-2UEW-0.31-GOD-F
DC resistance
30 :30 OHM MAX
13:13 OHM
GOM-801G MILI-OHM
Rated dc Current I
0.8A max
0.7 A
Ope. Temp.
- 40 TO 105 ℃
HC-D3M TEMP .& HUMIDITY CHAMBER
Hipot(1,2):(3,4)@1.0mA 1mins
1800Vdc
1800Vdc
Remark:
The following shapes and sizes can be customized
Number of samples
H
3. Product Feature And Application of Common Mode Inductor With Base Magnetic Ring
Super cost-effective design;
Common mode inductor with base magnetic ring Useful in a wide variety of power conversion application.
Wound on Mn-Zn power ferrite and high permeability ferrite are used in the line filters application.
Applications: Protects primary AC side from being affected by a switching regulator; Applied equipment : TV VCR switching power sources NC machines computer systems.
4. Product Details of Common Mode Inductor With Base Magnetic Ring
Common mode inductor with base magnetic ring use Fe-Ni and Mn-Zn material, and 155℃ uew-ny is used for enameled wire ;
High saturation current; Coated with varnish;
Characteristics: Inductance range: 10UH to 40MH ;
Insulation resistance: 100mΩmin when DC 500V between line to line ;
Operating temperature: -25℃ to 105℃
5. Product Qualification of Common Mode Inductor With Base Magnetic Ring
Common mode inductor with base magnetic ring due to low hysteresis coefficient, high magnetic induction intensity, low magnetic loss, and good DC superposition, can pass through high current, can withstand high and low temperature impact, quality, not easy to aging;
Wide inductance range;
Base material is made of FR-4 epoxy resin board, flammability grade UL 94V-0; Easy PC board installation.
6. Deliver, Shipping And Serving of Common Mode Inductor With Base Magnetic Ring
Our Common Mode Toroid Inductance generally have a domestic delivery date of 10 working days; The foreign delivery time is 20 working days. Our packaging adopts three-level packaging, which is firm and reliable, and can effectively protect the products from damage.
