EL0607 0810 I-shaped Coated Inductor

EL0607 0810 I-shaped Coated Inductor

EL0607 0810 I-shaped Coated Inductor is essentially a two-way filter: on the one hand, to filter out the common-mode electromagnetic interference on the signal line, on the other hand, to suppress the electromagnetic interference from itself, so as to avoid affecting the normal operation of other electronic devices in the same electromagnetic environment.

Send Inquiry

Product Description


1. Product Introduction of EL0607 0810 I-shaped Coated Inductor


 EL0607 0810 I-shaped Coated Inductor  is an electronic component with plug-in wave soldering. It has two types:There are vertical radial and horizontal two types, types of various types. It can also be customized according to the requirements of customers' current plates. 


The main feature is that it is wound with thick wires and can withstand tens of AMPS, hundreds, thousands, or even tens of thousands of AMPS. It is often used in the current equipment of high-power electrical products. Our products meet EU standards and are exported to China and other countries all over the world.


2. Product Parameter (Specification) of EL0607 0810 I-shaped Coated Inductor


Five RingsPART NO.

L m H

Q   min

TESTING

DCR (Ω)

I   mA

 

 

FREQ.

MAX

MAX

Inductance value

Quality factor

Test frequency

DC Resistance

Rated current

EL0607-122K-S0

1.2

70

@252KHZ

3.5

120

EL0607-152K-S0

1.5

70

@252KHZ

4.5

100

EL0607-182K-S0

1.8

70

@252KHZ

5.0

100

EL0607-222K-S0

2.2

70

@252KHZ

6.2

90

EL0607-272K-S0

2.7

70

@252KHZ

7.2

90

EL0607-332K-S0

3.3

70

@252KHZ

10.5

60

EL0607-392K-S0

3.9

70

@252KHZ

11.7

60

EL0607-472K-S0

4.7

70

@252KHZ

13.6

60

EL0607-562K-S0

5.6

70

@252KHZ

16.6

50

EL0607-682K-S0

6.8

70

@252KHZ

19.6

50

EL0607-822K-S0

8.2

70

@252KHZ

25.2

40

EL0607-103K-S0

10

70

@79.6KHZ

29.5

40

EL0607-123K-S0

12

70

@79.6KHZ

33.8

40

EL0607-153K-S0

15

70

@79.6KHZ

45.4

30

EL0607-183K-S0

18

70

@79.6KHZ

50.4

30

EL0607-223K-S0

22

70

@79.6KHZ

60.0

30

EL0607-303K-S0

30

70

@79.6KHZ

91.5

20

EL0607-333K-S0

33

70

@79.6KHZ

98.5

20

EL0607-393K-S0

39

70

@79.6KHZ

140.0

15

EL0607-473K-S0

47

70

@79.6KHZ

160.0

15

EL0607-503K-S0

50

70

@79.6KHZ

170.0

15

EL0607-563K-S0

56

70

@79.6KHZ

181.0

15

EL0607-683K-S0

68

50

@79.6KHZ

282.0

15

EL0607-823K-S0

82

50

@79.6KHZ

312.0

10

EL0607-104K-S0

100

30

@25.2KHZ

380.0

10

EL0607-124K-S0

120

30

@25.2KHZ

430.0

10

EL0607-154K-S0

150

30

@25.2KHZ

520.0

10 


EL0810  TYPE


Five Ring PART NO.

L m H

Q   min

TESTING

DCR (Ω)

I   mA

 

 

FREQ.

MAX

MAX

Inductance value

Quality factor

Test frequency

DC Resistance

Rated current

EL0810-102K-S0

1.0

65

@0.252MHZ

6.0

450

EL0810-122K-S0

1.2

140

@0.252MHZ

6.0

450

EL0810-152K-S0

1.5

130

@0.252MHZ

7.0

400

EL0810-162K-S0

1.6

150

@0.252MHZ

10.0

400

EL0810-182K-S0

1.8

150

@0.252MHZ

10.0

400

EL0810-222K-S0

2.2

150

@0.252MHZ

12.0

360

EL0810-272K-S0

2.7

140

@0.252MHZ

14.0

360

EL0810-302K-S0

3.0

140

@0.252MHZ

15.0

280

EL0810-332K-S0

3.3

140

@0.252MHZ

16.0

280

EL0810-392K-S0

3.9

130

@0.252MHZ

18.0

280

EL0810-472K-S0

4.7

120

@0.252MHZ

20.0

260

EL0810-562K-S0

5.6

120

@0.252MHZ

22.0

260

EL0810-682K-S0

6.8

110

@0.252MHZ

29.0

260

EL0810-752K-S0

7.5

110

@0.252MHZ

30.0

240

EL0810-822K-S0

8.2

100

@0.252MHZ

30.0

240 


3. Product Feature And Application of EL0607 0810 I-shaped Coated Inductor



EL0607 0810 I-shaped Coated Inductor Widely used in daily life, common are: television and audio equipment; Telecommunication equipment; Electronic control board; Rf filter; Other noise filters.


4. Product Details of EL0607 0810 I-shaped Coated Inductor


 EL0607 0810 I-shaped Coated Inductor Characteristics:

Inductance range : 10UH to 47MH ;.

Rated Current : It is either the inductance is 10% lower is than its initial value in DC. saturation characteristics or temperature rise becomes △T=20℃(Ta=20) Whichever lower.

Operating temperature: -20℃ to 85℃. 



5. Product Qualification of EL0607 0810 I-shaped Coated Inductor


The product has stable quality, high power, low temperature rise and excellent quality. The quality assurance of In-line inductor in the circuit is more than 5 years, which is trustworthy.

Insulation: AC 2000V 1 minute between line and line; Insulation Resisrance: 100mΩmin when DC 500V between line and line.;

 

 



6. Deliver, Shipping And Serving of EL0607 0810 I-shaped Coated Inductor


Our EL0607 0810 I-shaped Coated Inductor generally have a domestic delivery date of 10 working days; The foreign delivery time is 20 working days. Our packaging adopts three-level packaging, which is firm and reliable, and can effectively protect the products from damage.



Hot Tags: EL0607 0810 I-shaped Coated Inductor, Manufacturers, Suppliers, Wholesale, Buy, Factory, Customized, In Stock, Bulk, Free Sample, Brands, China, Made In China, Cheap, Discount, Low Price, Buy Discount, Price, Price List, Quotation, CE, Fashion, Newest, Quality, Advanced, Durable, Easy-maintainable, Latest Selling, 1 Year Warranty, Classy, Fancy

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
验证码,看不清楚?请点击刷新验证码